Overview
Overview
The SeaLevel Systems IC485+I interface converter provides Isolation and Auto baud capabilities, truly making it a no compromise interface converter. Isolation is important in installations where the equipment connected to the PC is either located far from the host system, or on a different power transformer circuit. Isolation on the IC485+I eliminates the effects of Ground Loop Current, a commonly neglected and misunderstood phenomenon that leads to data errors and the destruction of communications equipment.
Features
Hardware FeaturesThe IC485+I supports RS-422 full duplex mode as well as RS-485 full or half duplex master and slave modes. This gives the user flexibility in configuring the device to meet their specific application needs. Onboard LEDs are included to indicate that the device is properly powered and also illuminate when the device is transmitting and receiving to assist in verifying acceptable communications. Connection to external devices is provided by a six position screw terminal block on the board. Provisions for strain relief are made within the case by a cable clamp/screw combination. This eliminates unwanted wire disconnects once the screw terminals are wired.
The Auto baud feature allows the device to operate without the presence of RTS Software. This reduces system overhead and allows the IC485+I to operate flawlessly regardless of the operating system. Onboard LEDs are included to indicate that the device is properly powered and also illuminate when the device is transmitting and receiving to assist in verifying acceptable communications.
Unique Features:
- Supports data rates up to 115.2K bps
- RS-422 full duplex support
- RS-485 full or half duplex master and slave support
- RS-485 modes supported include Auto baud, RTS, data enable, and always enable
- Selectable 120 ohm line termination and 1K pull up/pull down biasing
- Onboard LEDS illuminate for Transmit and Receive
- AC adapter included
