Wonderware InTouch Client Driver OPC Server

Overview

The InTouch Client Driver was designed specifically for use with 32 bit OPC Server products and the Windows NT/2000/XP operating systems running on Intel microprocessor based computers. It can be used to expose Wonderware InTouch tag databases to OPC clients. This includes all I/O and memory tags in the Intouch Tag Database, including configured local and remote tags. KEPServerEX automatically optimizes your data acquisition based on client demand. Data integrity is ensured with our extensive error handling.

Wonderware InTouch 7.1 or higher is required. InTouch 7.11 and higher cannot be installed on Windows 98 systems.

The InTouch Client Driver OPC Server can be used to expose Wonderware InTouch tag databases to OPC clients. This includes all I/O and memory tags in the Intouch Tag Database, including configured local and remote tags.

Devices

Supported Devices

This driver can import tags defined in an InTouch project. Devices are dependent on the Wonderware InTouch application. The Intouch client driver can only connect to an Intouch Project Tag Database running on the same PC that it is on.

Features

Specific Driver Features

Specific

Automatic Tag Database Generation.
Imports tags defined in your InTouch applications, greatly reducing your project development effort.
Three modes of data access that you can use to optimize your communications with InTouch. Can obtain data via, (Driver polls InTouch, InTouch notifies driver, Combination)
Addresses with Mode Override
All major data types are supported.

General

Multi-threaded design for optimum performance.
Application Connectivity
Device Connectivity for concurrent devices.
Supports running as a Windows NT Service.
Supports Direct Scaling of device data.
Full Time On-line operation.
CSV file import and exportof server tags.
User Management
Tag Management
Network Interface Selection
Channel Diagnostics provide real-time data.
OPC Diagnostics to view OPC events.
Modem support for all serial drivers.
OPC Quick Client application.
Visual Basic OPC Client with VB Examples.

OPC/DDE

OPC Data Access Version 1.0a
OPC Data Access Version 2.05a
OPC Data Access Version 3.0

Learn more about OPC - Open Process Control

HMI/Client

KEPServerEX has been enhanced to provide the widest range of connectivity of any server product available. KEPServerEX supports the following client server technologies:

FastDDE for Wonderware
SuiteLink for Wonderware
iFIX PDB for Intellution
DDE Format CF_Text
DDE Format AdvancedDDE

To see a list of HMI's and Clients that we support go to our HMI / Client Support page.

Required

Required Software and Hardware

Supported Operating Systems

Windows NT
Windows 2000
Windows Server 2003
Windows XP

PC Hardware

Minimum

400 Mhz Pentium CPU
128 Megs of RAM
100 Megs of Free Hard Drive Space

Recommended

600 Mhz Pentium CPU
512 Megs of RAM
100 Megs of Free Hard Drive Space

Hardware Requirements

For Device and Hardware Requirements see the Devices tab.
Hardware Accessories

Protocol

Communication Protocol

N/A

VB

Visual Basic

KEPServerEX Visual Basic OPC Client
Complex and Simple Visual Basic OPC Client Examples
Using Modems and Visual Basic with KEPServerEX.
Download the Modem and VB Example with Source Code
Knowledge Base

Help

Help/Links

InTouch Client Driver / OPC Server