Mitsubishi CNC Ethernet OPC Server - KEPServerEX OPC Servers

Overview

The Mitsubishi Ethernet Device Driver was designed specifically for use with 32 bit OPC Server products running on Intel microprocessor based computers. For operating system (OS) requirements, please refer to the KEPServerEX help documentation.

This product is part of a Suite and when it is purchased you will receive all drivers in the suite. Mitsubishi OPC Server Suite

Mitsubishi CNC Ethernet

Devices

Supported Devices

Device	Note
C64 CNC Controller

Features

Specific Driver Features

Specific

PC number support for network bridging
Uses AJ71E71 family of communications cards
Memory Types Supported: X, Y, M, B, L, F, TS, TC, TN, CS, CT, CN, D, W, R
Support for Q specific Memory Types: DX, DY, SB, Sm, V, SS, SC, SN, SD, SW, Z
All data types are supported

General

Multi-threaded design for optimum performance.
Application Connectivity
Device Connectivity for concurrent devices.
Supports running as a Windows NT Service.
Supports Direct Scaling of device data.
Full Time On-line operation.
CSV file import and exportof server tags.
User Management
Tag Management
Network Interface Selection
Channel Diagnostics provide real-time data.
OPC Diagnostics to view OPC events.
Modem support for all serial drivers.
OPC Quick Client application.
Visual Basic OPC Client with VB Examples.

OPC/DDE

OPC Data Access Version 1.0a
OPC Data Access Version 2.05a
OPC Data Access Version 3.0

Learn more about OPC - Open Process Control

HMI/Client

KEPServerEX has been enhanced to provide the widest range of connectivity of any server product available. KEPServerEX supports the following client server technologies:

FastDDE for Wonderware
SuiteLink for Wonderware
iFIX PDB for Intellution
DDE Format CF_Text
DDE Format AdvancedDDE

To see a list of HMI's and Clients that we support go to our HMI / Client Support page.

Required

Required Software and Hardware

Supported Operating Systems

Windows NT
Windows 2000
Windows Server 2003
Windows XP

PC Hardware

Minimum

400 Mhz Pentium CPU
128 Megs of RAM
100 Megs of Free Hard Drive Space

Recommended

600 Mhz Pentium CPU
512 Megs of RAM
100 Megs of Free Hard Drive Space

Hardware Requirements

For Device and Hardware Requirements see the Devices tab.
Hardware Accessories

Protocol

Communication Protocol

Using Winsock V1.1 or higher

VB

Visual Basic

KEPServerEX Visual Basic OPC Client
Complex and Simple Visual Basic OPC Client Examples
Using Modems and Visual Basic with KEPServerEX.
Download the Modem and VB Example with Source Code
Knowledge Base

Help

Help/Links

Revisions

Mitsubishi CNC Ethernet OPC Driver Revisions

Driver updates below coincide with Server Release V4.270.416.0 (09/27/07)

All Drivers

- Fixed issue where server menu buttons like 'New', 'Open', 'Exit' would become permanently disabled when attempting to perform auto tag generation on a driver that had missing runtime dependencies.
- Fixed issue that could occur when multiple items with the same scan rate are read by exception and another item is added/asynchronously read/removed at that same rate. This issue resulted in stale data for those tags read by exception.

Driver updates below coincide with Server Release V4.264.401 (06/01/07)

All Drivers

- Fixed issue in the driver library where it was possible to delete a tag prior to stopping it. This would result in the accessing of invalid memory which could eventually result in an exception that would prevent a channel from processing any tags.

Driver updates below coincide with Server Release V4.210.367 (11/17/06)

All Drivers

- Fixed issue where a rapid sequence of item add, sync read, and item remove requests could result in bad OPC quality for some items included in a block sync read and/or sync read timeouts.
- Fixed issue with Unsolicited UDP Mode Ethernet Encapsulation mode, where driver would stop receiving unsolicited messages after sending a message.

Driver updates below coincide with Server Release V4.190.341 (11/23/05)

Mitsubishi CNC Ethernet (V4.00.14)

- New driver for the following device:
- C64 CNC Controller

Driver updates below coincide with Server Release V4.110.270 (3/22/04)

All Drivers

- Library fix affecting all drivers.

Driver updates below coincide with Server Release V4.90.237 (5/10/03)

All Drivers

All drivers have been updated to support 32 channels. (Exceptions are DDE Client driver, Modbus Plus, and SattBus).