Kepware Knowledge Base: Solution
Using Omron CP1 Series PLCs with Omron FINS Ethernet and Serial Drivers
Last Update: 11/12/2018
When using Kepware's Omron FINS Ethernet and Omron FINS Serial drivers with an Omron CP1 series PLC (CP1E, CP1L, and CP1H ), users should do the following:
- Select a device model of CJ1.
- Verify the address ranges for the model in use. The table below displays ranges that were taken from the Omron specifications; however, the best way to see the address ranges for the model in use is with CX Programmer.
Type
|
Maximum Address
|
CP1L
|
CP1H
|
CP1E
|
CIO
|
6143
|
6143
|
289
|
W
|
511
|
511
|
99
|
H
|
511
|
511
|
49
|
A
|
959
|
959
|
753
|
T
|
4095
|
4095
|
255
|
TS
|
4095
|
4095
|
255
|
C
|
4095
|
4095
|
255
|
CS
|
4095
|
4095
|
255
|
D
|
( -M ) 32767
( -L ) 0 - 9999 and 32000 -32767
|
32767
|
( -E ) 2047
( -N ) 8191
|
DR
|
15
|
15
|
|
IR
|
15
|
15
|
|
TK
|
31
|
31
|
|
Note: Kepware has not verified driver operation with any of the CP1 series PLCs.
©
2022
PTC Inc. All Rights Reserved.