正在加载……

选择您的首选语言

ABB Totalflow

许可开始日期 $1340.00
Download Free Demo
产品 KEPServerEX 驱动

产品概览

适用于 KEPServerEX 的 ABB Totalflow 驱动连接至支持本机 Totalflow 串行协议的 ABB Totalflow 设备。Totalflow 协议通常在石油和天然气产业的上游用于过程控制和井口的碳氢化合物测量，而且在中游的石油和天然气设备中也会用到。它能够为 SCADA、HMI 和测量应用程序提供数据。ABB Totalflow 驱动还收集气体和液体的历史电子式流量测量 (EFM) 数据，以配合 EFM Exporter 使用。

资源

性能

  • 支持通信的途径：
    • 以太网封装
    • 拨号调制解调器
      • 自动拨号
      • 多个电话号码
  • 字符串支持
  • 支持最多 1024 个通信通道
  • 支持扫描模式以控制客户端轮询速率
  • 支持检索存储在设备本地的趋势日志并通过 CSV 格式提供这些日志
  • 支持检索气体和液体 EFM 数据
  • 设备自动降级
  • 针对 EFM 轮询、用户指定的间隔或时间的时间同步
  • 介质级别冗余
  • 支持即时配置用户定义的块大小
  • 包括指针回滚以从设备检索丢失的数据
  • 通信序列化

协议

  • ABB DB1
  • ABB DB2

支持的设备

  • ABB Totalflow 6000 series FCU
  • ABB Totalflow 6000 series microFLO
  • ABB Totalflow 6000 XSeriesG3
  • ABB Totalflow 6000 XSeriesG4

可用语言

  • 英语

应用程序支持

  • DDE Format CF_Text and AdvancedDDE
  • NIO Interface for iFIX
  • OPC .NET Service (OPC .NET) Version 1.00
  • OPC Alarms and Events (OPC AE) Version 1.10
  • OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
  • OPC Unified Architecture (OPC UA) Clients
  • SuiteLink and FastDDE for Wonderware

文档

发行说明

6.9.572.0

2020/6/2

  • Fixed an issue where trend uploads initiated by the TF_UploadAll tag would be aborted if a file with no new records was encountered.
  • Added support for downloading trend files from G3 devices.
  • Fixed an issue where the driver could retry indefinitely if the device returned a NACK to a request.

6.8.796.0

2019/12/17

  • Added option to rollback EFM data based on the physical device pointer (this is in addition to the currently supported functionality to rollback EFM data based on the driver cached pointer).
  • Improved error handling to pass additional third-party toolkit communication error messages to the event log.

6.7.1046.0

2019/6/18

  • Resolved an issue introduced in the 6.5.829.0 release where the driver could stop processing new read requests on existing devices and show the channel level _PendingReads tag as stuck. This usually happened following EFM read attempts that were interleaved with real time reads. 
  • Corrected an issue introduced in the 6.6.348.0 release where the driver could endlessly retry if receiving responses (noise) but with no valid data from the device. 
  • Enhanced the driver to support an older version of firmware for liquid meters, which corresponds to ABB extradata.ini revision #52. 

6.6.348.0

2018/11/14

  • 为 6.5 版中新增的 EFM Pointer Rollback 功能添加了文档。
  • 修复了以下问题：驱动程序错误地达到通信重试限制，并停止通信。

6.5.829.0

2018/6/19

  • 增加了对所有仪表不匹配错误的事件日志消息。
  • 对于液体涡轮仪表，增加了对 ABB extradata.ini 新修订版本的支持。
  • 修复了在报告 DB1 设备的每小时流量时间时产生的问题。
  • 修复了在某些情况下字符串读取失败的问题。
  • 增加了功能以确保 EFM 轮询不会因高频率实时轮询而无法完成。
  • 增加了指针回滚以从设备检索丢失的数据。

6.4.405.0

2018/6/11

  • 增加了对 extradata.ini 修订版 81 的支持。

6.4.321.0

2017/12/13

  • 将最大 EFM 计量器计数增加至 128。
  • 修复了 _PercentValid 和 _PercentReturn 高级统计信息标签不显示有效结果的问题。
  • 现在可以正确处理文件名中包含句点/点“.”字符的趋势文件标签。

6.3.305.0

2018/6/11

  • 增加了对 extradata.ini 修订版 81 的支持。
  • 将 DB2 格式的最大 EFM 仪表计数增加到 128。

6.3.273.0

2017/9/27

  • 增加了更多有关时间同步的选项：
    • 仅在设备时间与系统时间之差超过某个阈值时才允许时间同步。
    • 对 EFM 轮询执行时间同步。

6.2.506.0

2018/6/11

  • 修复了从设备读取的有效 null 终止字符串标记为“无效数据类型”的问题。
  • 将 DB2 格式的最大 EFM 仪表计数增加到 128。
  • 增加了对 extradata.ini 修订版 81 的支持。

6.2.429.0

2017/6/8

  • 解决了以下问题：如果“关闭前的空闲时间”(Idle Time Before Close) 设置为 0（在通道属性中），设备时间同步失败。

6.1.655.0

2018/6/11

  • 修复了液体 EFM 导出时仪表 ID 填充错误的问题。
  • 增加了对 extradata.ini 修订版 81 的支持。

6.1.601.0

2017/4/4

  • 对 ABB Totalflow 设备禁用数据收集时，禁止时间同步。
  • 纠正了以下问题：当设备的内部 EFM 记录序列号转存时，无法检索所有 EFM 记录。

6.0.2206.0

2018/6/11

  • 增加了对 extradata.ini 修订版 81 的支持。
  • 修改后可在文件名包含“.”字符时正确处理趋势文件标记。
  • 如果设备被禁用，则不允许显示时间同步消息。

6.0.2107.0

2016/11/15

  • 现在，仪表呈现在项目树状视图中，以改进可见性和编辑能力。

5.21.235.0

2018/6/11

  • 修复了设备内部序列号回滚后 EFM 轮询失败的问题。
  • 修复了在发生回滚和缓存重置后，现有记录无法检索的问题。

5.21.114.0

2017/3/20

  • 纠正了以下问题：当设备的内部 EFM 记录序列号转存时，无法检索所有 EFM 记录。

5.20.396.0

2016/5/3

  • Increased the maximum number of EFM meters allowed to 70 for Totalflow DB2 format.

5.19.467.0

2015/10/20

  • Resolved an issue where missing records on the device could prevent the Trend File upload from completing.
  • Added an error for when the protocol version is not set correctly.

5.18.662.0

2015/6/23

  • Enhanced the driver to support Trend File uploads. The new Trend File feature supports:
    • Publishing trend data to a CSV file
    • The ability to limit uploads based on time parameters
    • Optimized data uploads in limited-bandwidth scenarios (via segmented requests)
    • Scheduling uploads with the Scheduler Plug-in,
  • Enhanced the driver to support Advanced Statistics tags, including "_CommFailures" and "_ErrorResponses".
  • Enhanced the driver to support liquid EFM for model 6000 XSeriesG4
  • Support Gen4 devices for liquid using the DB2 protocol.
  • Support for hourly history, daily history, batch, liquid product, alarms, and events.
  • Support for a single Totalflow device with both liquid and gas meters.
  • No longer perform a time synchronization operation on startup when the Time Sync Method is Absolute.

5.17.495.0

2015/2/24

  • Increased the maximum channel limit from 512 to 1024.

5.15.585.0

2014/7/22

  • Fixed an issue where writes would not be processed when multiple devices on a channel were configured to use a Register Requests/Packet setting greater than 1.
  • Enhanced the driver to cache the pointer file to disk so that it will not re-poll for data already collected on server start-up.
  • Fixed an issue that would cause the driver to re-poll records starting at sequence number one in the event that the sequence number is less than the archive capacity.

5.14.491.0

2014/2/18

  • Increased the ABB Totalflow Driver's maximum channel limit from 256 to 512.

5.13.191.0

2013/10/15

  • Increased the maximum number of supported channels from 100 to 256.

5.12.140.0

2013/6/18

  • Updated the driver to convert flow times reported by Totalflow devices in integer seconds to floating-point minutes. This makes flow times exported by the EFM Exporter for Totalflow meters consistent with other meter types.

5.11.250.0

2013/3/5

  • Improved the driver's EFM data collection performance and efficiency when intermittent communication errors are seen with the connection to the EFM data source. The optimizations are handled in the driver automatically and no project configuration changes are required in the driver UI.
  • Added DB1 as a supported Protocol Version of the driver to support G1 and early G2 Totalflow FCUs. The default setting for the driver is DB2 so users must edit Totalflow Settings to select DB1 for applicable devices in the server project.
  • Fixed an issue where the Access Type for Characteristic tags was set to Read/Write when it should have been Read Only.

5.10.205

2012/11/13

Initial release of the new driver with support for real-time and EFM communications. This release provides support for connectivity to Totalflow devices using the native DB2 protocol. The driver is a serial driver but supports Ethernet Encapsulation. The driver can be selected for installation independently or as part of the Oil & Gas Suite.

功能（包含在 EFM Suite 中时）：

  • EFM 支持
  • EFM 配置和映射
    • 历史记录，包括气相色谱仪数据
      • 每小时
      • 每天
    • 警报
    • 事件

特色套件


什么是驱动？

KEPServerEX 不仅是 OPC 服务器，它还是一种用于工业自动化和 IoT 的连接平台。只需下载 KEPServerEX，然后从包含 150 多种设备驱动、客户端驱动和高级插件的 Kepware 库中选择，就能满足您的工业控制系统的独特通信要求。

驱动是一种软件组件，能够使 KEPServerEX 满足某个特定设备、系统或其他数据源的连接要求。驱动可处理 KEPServerEX 与数据源进行的所有专属通信；客户端接口处理通向监控或控制设备的应用程序的所有连接，包括支持的 OPC 连接、专属连接和开放式标准连接。

驱动可以单独或以套件形式获得授权许可。随着连接需求的发展，可以按需对其他驱动进行许可。

© 2020 PTC Inc. 保留所有权利。