正在加载……

AutomationDirect DirectNET

参见购买信息了解更多详情
Download Free Demo

产品概览

AutomationDirect DirectNET 设备驱动与 KEPServerEX 结合使用,在 OPC 客户端与使用 DirectNET 协议的 PLC 之间提供数据交换。KEPServerEX 基于客户端需求自动优化您的数据采集过程。我们强大的错误处理能力可确保数据完整性。

资源

性能

  • 支持以太网封装
  • 支持所有数据类型
  • 调制解调器支持
    • 自动拨号配置
    • 多电话号码管理

协议

  • Koyo DirectNet Hex Mode Protocol

支持的设备

  • DL-05
  • DL-06
  • DL-230
  • DL-240
  • DL-250
  • DL-260
  • DL-330
  • DL-340
  • DL-350
  • DL-430
  • DL-440
  • DL-450

可用语言

  • 英语

应用程序支持

  • DDE Format CF_Text and AdvancedDDE
  • NIO Interface for iFIX
  • OPC .NET Service (OPC .NET) Version 1.00
  • OPC Alarms and Events (OPC AE) Version 1.10
  • OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
  • OPC Unified Architecture (OPC UA) Clients
  • SuiteLink and FastDDE for Wonderware

发行说明

6.10.659.0

2021/8/10

  • Fixed an issue that prevented the driver from communicating with devices.

5.17.495.0

2015/2/24

  • Corrected an issue where the driver would produce a syntax error during tag validation if the data type was not supported. Some clients add items with a set data type regardless of the address. The driver now responds with bad type, allowing the driver library to validate again with the default type.
  • Fixed an issue where Data Words Timers (V0-V377) and Counters (V1000-V1177) default to the BCD data type even if the address was a bit within data type; bit within BCD is not supported. For V addresses with bit-access syntax, the driver now defaults to the Short data type for the bit range 0 to 15 and to the Long data type for bit range 16 to 31.

5.6.122.0

2011/7/25

  • Enhanced error handling when receiving unexpected responses, and special detection of a K-Sequence response to a DirectNet inquiry. On receiving a K-Sequence response to a DirectNet inquiry, an error message will be logged, all tags will be failed, and the driver will continue to silently retry for good communications.