产品概览
Fanuc Focas Ethernet 设备驱动与 KEPServerEX 结合使用，可在 OPC 客户端与 Focas CNC 之间提供数据交换。此驱动还支持快速以太网卡的主动通信模式。KEPServerEX 基于客户端需求自动优化您的数据采集过程。我们强大的错误处理能力可确保数据完整性。
此驱动需要并使用 FANUC America Corporation 提供的 Focas 1 或 Focas 2 接口库文件。（Focas2 库文件将以太网和 HSSB 功能结合起来。）虽然创建服务器项目时不需要安装此库文件，但没有它项目无法运行。从 FANUC 分销商那里或拨打 1-888-FANUC-US (1-888-326-8287) 可获得此软件。
资源
性能
- 支持 Focas 1 Ethernet 接口库文件（Fanuc 部件编号 A02B-0207-K732）
- 支持 Focas 2 Ethernet 和 HSSB（高速串行总线）接口库文件（Fanuc 部件编号 A02B-0207-K737）
- 支持 i 系列 CNC 控制器的 PMC 数据区
- 通过 cnc_rdparam（读取参数）标记支持 NC 数据
- 支持主动数据报告
支持的设备
- FANUC Power Mate i
- FANUC Series 0i
- FANUC Series 15
- FANUC Series 15i
- FANUC Series 16
- FANUC Series 16i
- FANUC Series 18
- FANUC Series 18i
- FANUC Series 21
- FANUC Series 21i
- FANUC Series 30i
- FANUC Series 31i
- FANUC Series 32i
- Open Addressing
应用程序支持
- DDE Format CF_Text and AdvancedDDE
- NIO Interface for iFIX
- OPC .NET Service (OPC .NET) Version 1.00
- OPC Alarms and Events (OPC AE) Version 1.10
- OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
- OPC Unified Architecture (OPC UA) Clients
- SuiteLink and FastDDE for Wonderware
发行说明
6.11.718.0
2021/12/21
- Added support for the cnc_sysinfo call.
- Extended the range for Tool Offset Number and Type limits.
6.10.623.0
2021/2/23
- Added support for the cnc_rdtimer call to allow reading five different timers from the device.
- Added support for the cnc_rdalmmsg call to allow reading current alarm information; including number, type, and message.
- Fixed an issue where trying to read the cnc_exeprgname_Name tag could lead to a crash.
6.9.636.0
2021/8/10
- Fixed an issue with the cnc_exeprgname tag that could crash the server.
6.9.572.0
2020/6/2
- Updated the cnc_rdaxisdata tags to allow up to 32 axes instead of limiting to 4.
- Added support for the cnc_exeprgname call, which gives access to the Program Name and Number of the current program.
- Added support for the cnc_rddynamic2 call. This allows access to many different values including Alarms, Position Values, Feed Rate, Spindle Speed, Sequence Number, and Program Number.
6.8.796.0
2019/12/17
- Added the ability to read the program number currently selected on the device (cnc_rdprgnum).
6.7.1046.0
2019/6/18
- Added support for the following Fanuc Focas Data Window Library calls:
- cnc_alarm2
- cnc_diagnoss
- cnc_rdaxisdata
- cnc_setpath
- cnc_getpath
- Fixed an issue where the Event Log error messages were not reporting the correct error code value.
6.6.348.0
2018/11/14
- 添加了 cnc_rdparam 标记，用于使用 K737 库为特定 Focas 设备获取参数。该驱动程序允许最终用户通过输入参数编号和轴编号（如适用）来从 Focas 控制器获取数据。
6.0.2107.0
2016/11/15
- IP 地址八位元组现在受到正确的约束，最大值为 255。
5.20.396.0
2016/5/3
- Added the ability to set the maximum request size to 8 bytes. This provides access to non-contiguous macros below #1000.
5.19.467.0
2015/10/20
- Renamed the GE Focas Ethernet driver to Fanuc Focas Ethernet to reflect corporate changes by vendor.
5.15.585.0
2014/7/22
- Increased the maximum channel count from 100 to 256.
5.9.170
2012/6/26
- Enhanced the driver's Open model to support the Series 30i device.
- Fixed an issue where the driver was not communicating after the device was disconnected and then reconnected.
5.8.109.0
2012/2/21
Changed the minimum Device ID from 1 to 0.
5.4.131.0
2010/10/28
- Fixed an issue wherein all models except the Series 15i had one or more invalid address ranges. This issue was introduced with the addition of CNC status info tags.
5.3.118.0
2010/6/9
- Fixed issue where all models except the Series 15i had one or more invalid address ranges. The bug was introduced with the addition of CNC status info tags.
5.2.133.0
2010/2/18
- Fixed address parser problem introduced with addition of CNC status info tags
5.1.71.0
2009/10/21
- Added support for CNC Status Info tags.
