正在加载...

Omron FINS Serial

参见购买信息了解更多详情
Download Free Demo

产品概览

Omron FINS Serial 驱动与 KEPServerEX 协同工作,通过 RS-232 或 RS-422 在 OPC 客户端和使用 Omron FINS 协议的 PLC 之间交换数据。它还支持 Sysmac Link 操作,以通过 Sysmac Net 访问其他 PLC。KEPServerEX 可根据客户端的需求自动优化数据采集,并通过强大的错误处理能力确保数据完整性。

资源

性能

  • 支持 FINS 网关以允许 Sysmac Link 和 Sysmac Net 访问
  • 支持以太网封装
  • 调制解调器支持
    • 自动拨号配置
    • 多电话号码管理

协议

  • Omron FINS over Serial

支持的设备

  • Devices Supporting FINS protocol via Sysmac Way: Host Link Interface

可用语言

  • Simplified Chinese
  • 日语
  • 英语

应用程序支持

  • DDE Format CF_Text and AdvancedDDE
  • NIO Interface for iFIX
  • OPC .NET Service (OPC .NET) Version 1.00
  • OPC Alarms and Events (OPC AE) Version 1.10
  • OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
  • OPC Unified Architecture (OPC UA) Clients
  • SuiteLink and FastDDE for Wonderware

发行说明

6.2.460.0

2017/7/6

  • 增加了中文支持。

6.0.2107.0

2016/11/15

  • 增加了日语支持。

5.17.495.0

2015/2/24

  • Corrected an issue where the driver would produce a syntax error during tag validation if the data type was not supported. Some clients add items with a set data type regardless of the address. The driver now responds with bad type, allowing the driver library to validate again with the default type.

5.6.122.0

2011/7/25

  • Added the ability to select the behavior when writes are issued to TS and CS addresses (when the PLC is in Run Mode). Previously, these writes would fail and an error would be logged. Now, options exist to set the PLC to Monitor Mode and perform the write, or to set the PLC to Monitor Mode, perform the write, and then reset the PLC to Run Mode.

5.4.131.0

2010/10/28

  • Added support for the CJ2 Model.
  • Added the reporting of device-level error conditions and detection of network relay error frames. We now output the following error messages instead of posting "Device not responding" messages:

     • Network relay error.[Net Addr, Node Addr: '0x00, 0x3A'], [End Code: '0x8302']

     • Fatal CPU Unit error.[End Code: '0x0080']

     • Non-fatal CPU Unit error.[End Code: '0x83C2']

5.3.118.0

2010/6/9

  • Fixed Address Hints for the C500 IR register.
  • Added 2 new string types:

    • XXX as string with Only the Low Order byte (LSB - least significant 8-bits) of each word is used for

      read/write. , Syntax: XXXaddr.lenE

    • XXX as string with Only the High Order byte(MSB - most significant 8-bits) of each word is used for

      read/write. , Syntax: XXXaddr.lenD

  • 有关支持 Sysmac Way(Host Link 接口)的当前模型列表,请访问制造商网站。

什么是驱动?

KEPServerEX 不仅是 OPC 服务器,它还是一种适用于工业自动化和 IoT 的连接平台。只需下载 KEPServerEX,然后从包含 150 多种设备驱动、客户端驱动和高级插件的 Kepware 库中选择,以便适合您工业控制系统的独特通信要求。

驱动是一种软件组件,能够使 KEPServerEX 满足某个特定设备、系统或其他数据源的连接要求。此驱动处理 KEPServerEX 与数据源进行的所有专属通信;客户端接口处理通向监控或控制设备的应用程序的所有连接,包括支持的 OPC 连接、专属连接和开放式标准连接。

驱动可以单独或以套件形式获得授权许可。随着连接需求的发展,可以按需对其他驱动进行许可。

购买信息

Omron FINS Serial

此产品可通过以下套件购买: